#

 

33113N - QUICK COUPLER SHUT OFF

Category:
ACCESS VALVES

Sub Category:
COUPLERS

1/4" quick coupler X 1/4" SAE at 90 degree angle.

Use this quick coupler with existing charging hose. Immediately traps refrigerant discharge from hose when disconnecting from access fitting.

JB manufactures our quick couplers at the facility in Aurora, Illinois. 1/4" couplers have a valve core depressor, safety channels and rubber gasket seal. JB machines all of the access valves using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged. All tees and crosses are tapped to receive an access core in all 1/4" SAE flare ends. All pipe connections have internal braze cups for dip tube applications. All valves are equipped with cap and one valve core (braze type, loosely assmbled). Temperature range -40 degrees to +250 degrees Farhenheit (-40 to 121.1 degrees Celcius). Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkalites, and diluted mineral acids.

Made in the USA.